Flat Hard Resin H0604 low-temperature tolerance Suitable for surface decoration and protection of crafts made from metal
This product is a new generation of flat resin specifically developed for jewelry, imitation gemstones, signs, and nameplates.
The series includes flat hard resin, flat soft resin, curved hard resin, and curved soft resin. This variant is flat hard resin.
Crystal drip resin not only provides excellent surface protection for craft items but also enhances surface gloss and brightness, further improving decorative effects.
Suitable for surface decoration and protection of crafts made from metal,
Shenzhen jitian Chemical Co., Ltd. - Rigid Plastic Sheets | |||
Technical Parameters Before Mixing | |||
Component | Component A | Component | Component B |
Appearance Color | Clear liquid | Appearance Color | Clear liquid |
Viscosity (cP) | 3500 | Viscosity (cP) | 50 |
Specific Gravity (cm³/g) | 1.05 | Specific Gravity (cm³/g) | 0.98 |
Technical Specifications After Mixing | |||
Mixing Ratio (Weight Ratio) | Component A: Component B = 3:1 | ||
Mixing Ratio (Volume Ratio) | Component A: Component B = 100:35-40 | ||
Color | Clear liquid | ||
Viscosity after mixing (cP) | 1500-2000 | ||
Working time | 40-80（分钟） | ||
Initial set time | 20℃：4-8（小时） | ||
Curing time | 60℃：1-3（小时） | ||
Full cure | 25℃：24（小时） | ||
Technical parameters after 7 days curing at 25°C, 60% RH | |||
Hardness | 81（SHORE D） | ||
Service temperature range | -50-110(℃) | ||
Compressive strength | 20KG/MM2 | ||
Flexural strength | 15KGMM2 | ||
Water absorption rate | ＜0.01%25℃/24hour | ||
The above data is for reference only; actual results are subject to experimental verification. | |||
- Parameters
Shenzhen jitian Chemical Co., Ltd. - Rigid Plastic Sheets | |||
Technical Parameters Before Mixing | |||
Component | Component A | Component | Component B |
Appearance Color | Clear liquid | Appearance Color | Clear liquid |
Viscosity (cP) | 3500 | Viscosity (cP) | 50 |
Specific Gravity (cm³/g) | 1.05 | Specific Gravity (cm³/g) | 0.98 |
Technical Specifications After Mixing | |||
Mixing Ratio (Weight Ratio) | Component A: Component B = 3:1 | ||
Mixing Ratio (Volume Ratio) | Component A: Component B = 100:35-40 | ||
Color | Clear liquid | ||
Viscosity after mixing (cP) | 1500-2000 | ||
Working time | 40-80（分钟） | ||
Initial set time | 20℃：4-8（小时） | ||
Curing time | 60℃：1-3（小时） | ||
Full cure | 25℃：24（小时） | ||
Technical parameters after 7 days curing at 25°C, 60% RH | |||
Hardness | 81（SHORE D） | ||
Service temperature range | -50-110(℃) | ||
Compressive strength | 20KG/MM2 | ||
Flexural strength | 15KGMM2 | ||
Water absorption rate | ＜0.01%25℃/24hour | ||
The above data is for reference only; actual results are subject to experimental verification. | |||
I. Product Overview:
This product is a new generation of flat resin specifically developed for jewelry, imitation gemstones, signs, and nameplates.
The series includes flat hard resin, flat soft resin, curved hard resin, and curved soft resin. This variant is flat hard resin.
Crystal drip resin not only provides excellent surface protection for craft items but also enhances surface gloss and brightness, further improving decorative effects.
Suitable for surface decoration and protection of crafts made from metal, ceramic, glass, acrylic, and other materials.
Crystal drip resin offers outstanding flexibility, scratch resistance, low-temperature tolerance, yellowing resistance, high transparency, and ease of application. It also exhibits excellent adhesion to various substrates.
Specification
Shenzhen jitian Chemical Co., Ltd. - Rigid Plastic Sheets | |||
Technical Parameters Before Mixing | |||
Component | Component A | Component | Component B |
Appearance Color | Clear liquid | Appearance Color | Clear liquid |
Viscosity (cP) | 3500 | Viscosity (cP) | 50 |
Specific Gravity (cm³/g) | 1.05 | Specific Gravity (cm³/g) | 0.98 |
Technical Specifications After Mixing | |||
Mixing Ratio (Weight Ratio) | Component A: Component B = 3:1 | ||
Mixing Ratio (Volume Ratio) | Component A: Component B = 100:35-40 | ||
Color | Clear liquid | ||
Viscosity after mixing (cP) | 1500-2000 | ||
Working time | 40-80（分钟） | ||
Initial set time | 20℃：4-8（小时） | ||
Curing time | 60℃：1-3（小时） | ||
Full cure | 25℃：24（小时） | ||
Technical parameters after 7 days curing at 25°C, 60% RH | |||
Hardness | 81（SHORE D） | ||
Service temperature range | -50-110(℃) | ||
Compressive strength | 20KG/MM2 | ||
Flexural strength | 15KGMM2 | ||
Water absorption rate | ＜0.01%25℃/24hour | ||
The above data is for reference only; actual results are subject to experimental verification. | |||
Operating Procedure:
1. Cleaning: Before use, sand the surface of the object to be bonded smooth and ensure it is thoroughly clean.
2. Mixing: Maintain precise proportions. The mixing ratio for this product is 3:1 by weight, i.e., 30 grams of Component A to 10 grams of Component B. Stir thoroughly before use. For optimal results, vacuum degassing is recommended prior to application.
3. Application: Epoxy products cure effectively at room temperature. Accelerated curing occurs at 30-80°C (86-176°F). Higher temperatures increase curing speed and final strength.
4. Molding: After applying adhesive, secure bonded parts with clamps until fully cured before use.
Notes:
1. Product specifications and usage recommendations are based on our current understanding. As we cannot control customer application requirements or production processes, users must verify suitability. We recommend conducting small-scale trials first.
2. No returns or exchanges will be accepted during small-batch trial phases.
3. Based on customer test results, if samples are confirmed acceptable, all subsequent shipments will strictly adhere to the sample specifications.
4. Should customers have quality concerns upon receiving goods, please provide supporting evidence. (For returns or exchanges, do not add any items to the product package; otherwise, returns/exchanges will be declined.)
5. The above quotation serves as a reference price. Customers placing large orders may negotiate terms with our customer service representatives.
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Previous : Flat Soft Resin H0603 Ultra-soft epoxy resin crystal drip coating with low viscosity hardware
Next : Curved Surface Hard Resin H0609 odorless water-resistant used for surface coating on products such as buttons
Copy product links
Long by picture save/share
Flat Hard Resin H0604 low-temperature tolerance Suitable for surface decoration and protection of crafts made from metal
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
