SEBS YH-502T C0803 has good stability and excellent aging resistance Manufacturable surgical gloves
SEBS has good stability and excellent aging resistance. It has both plasticity and high elasticity. It can be processed and used without vulcanization. The scrap can be reused. It is widely used to produce high-quality elastomers, plastic modification, adhesives, and lubrication Oil tackifiers, fillers and sheath materials for wires and cables, etc. SEBS also has good weather resistance, heat resistance, compression deformation resistance and excellent mechanical properties.
ltem | YH-501 /T | YH-502 /T | YH-503 /T | YH-561 /T | YH-688 | YH-602 /T | YH-604 /T | YH-511 | YH-506 |
Volatiles (≤%)
| 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.6 |
Stress at 300%(≥MPa)
| 3.0 | 3.0 | 3.0 | 4.0 | 1.0 | 3.0 | 3.5 | 3.0 | 1 |
Tensile strength(≥MPa)
| 16.0 | 18.0 | 16.0 | 16.0 | 10 | 18.0 | 20 | 14 | 7.0 |
Elongation(≥%)
| 450 | 450 | 400 | 400 | 700 | 400 | 450 | 500 | 700 |
Permanent deformation(≤%)
| 50 | 50 | 50 | 50 | 12 | 50 | 40 | 30 | 20 |
Hardness Shore | 68 | 68 | 70 | 75 | 43 | 80 | 73 | 73 | 45-51 |
Degree of hydrogenation | 97 | 97 | 97 | 97 | 97 | 97 | 97 | 97 | - |
Toluene solution viscosity (10%,25,Mpa.s) | 400-800 | 200-400 | 2000-3000 | 1000-2000 | - | 200-800 | - | - | - |
MFR 10min/g | - | - | - | - | 0.5 | - | - | 0.3-0.8 | 2.5-3.0 |
- Parameters
ltem | YH-501 /T | YH-502 /T | YH-503 /T | YH-561 /T | YH-688 | YH-602 /T | YH-604 /T | YH-511 | YH-506 |
Volatiles (≤%)
| 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.6 |
Stress at 300%(≥MPa)
| 3.0 | 3.0 | 3.0 | 4.0 | 1.0 | 3.0 | 3.5 | 3.0 | 1 |
Tensile strength(≥MPa)
| 16.0 | 18.0 | 16.0 | 16.0 | 10 | 18.0 | 20 | 14 | 7.0 |
Elongation(≥%)
| 450 | 450 | 400 | 400 | 700 | 400 | 450 | 500 | 700 |
Permanent deformation(≤%)
| 50 | 50 | 50 | 50 | 12 | 50 | 40 | 30 | 20 |
Hardness Shore | 68 | 68 | 70 | 75 | 43 | 80 | 73 | 73 | 45-51 |
Degree of hydrogenation | 97 | 97 | 97 | 97 | 97 | 97 | 97 | 97 | - |
Toluene solution viscosity (10%,25,Mpa.s) | 400-800 | 200-400 | 2000-3000 | 1000-2000 | - | 200-800 | - | - | - |
MFR 10min/g | - | - | - | - | 0.5 | - | - | 0.3-0.8 | 2.5-3.0 |
Product introduction
SEBS has good stability and excellent aging resistance. It has both plasticity and high elasticity. It can be processed and used without vulcanization. The scrap can be reused. It is widely used to produce high-quality elastomers, plastic modification, adhesives, and lubrication Oil tackifiers, fillers and sheath materials for wires and cables, etc. SEBS also has good weather resistance, heat resistance, compression deformation resistance and excellent mechanical properties.
Typical Properties
ltem | YH-501 /T | YH-502 /T | YH-503 /T | YH-561 /T | YH-688 | YH-602 /T | YH-604 /T | YH-511 | YH-506 |
Volatiles (≤%)
| 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.6 |
Stress at 300%(≥MPa)
| 3.0 | 3.0 | 3.0 | 4.0 | 1.0 | 3.0 | 3.5 | 3.0 | 1 |
Tensile strength(≥MPa)
| 16.0 | 18.0 | 16.0 | 16.0 | 10 | 18.0 | 20 | 14 | 7.0 |
Elongation(≥%)
| 450 | 450 | 400 | 400 | 700 | 400 | 450 | 500 | 700 |
Permanent deformation(≤%)
| 50 | 50 | 50 | 50 | 12 | 50 | 40 | 30 | 20 |
Hardness Shore | 68 | 68 | 70 | 75 | 43 | 80 | 73 | 73 | 45-51 |
Degree of hydrogenation | 97 | 97 | 97 | 97 | 97 | 97 | 97 | 97 | - |
Toluene solution viscosity (10%,25,Mpa.s) | 400-800 | 200-400 | 2000-3000 | 1000-2000 | - | 200-800 | - | - | - |
MFR 10min/g | - | - | - | - | 0.5 | - | - | 0.3-0.8 | 2.5-3.0 |
Application/Uses
1. SEBS has good UV stability, anti-oxidation and thermal stability, so it can also be used in roofing and road construction asphalt.
2. SEBS has good compatibility with paraffin, so it can be used as a more flexible surface coating for paper products.
3. SEBS is insensitive to temperature when heated without obvious shear flow, so it can be used as a template for IPN. (The basic principle of IPN: two immiscible polymers can achieve the interpenetration of entangled segments. For example, two immiscible polymers can be 'locked' together by covalent bond crosslinking.)
4. The organic solution of SEBS oil blend can replace natural latex to manufacture surgical gloves and other products. Since SEBS does not contain unsaturated double bonds and has high purity, it has the following two advantages: (1) Antioxidant, anti-oxidant Ozone is better; 2) Natural rubber contains protein, which can cause dangerous allergic reactions in some patients, but this blend will not.
Comments
Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
Packing:13KG / bag
REMARK |
Jitian Chemical shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment , and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product and nothing herein waves any of the seller's conditions of sale
|
Previous : SEBS YH-502 Widely applicable for soft contact materials such as handles stationery toys and sports equipment grips
Next : Chlorinated rubber JTS-20 C1101 Chlorinated rubber is widely used in coatings road marking paints fireproof paints
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
