Two-component water-based epoxy resin floor paint (classic gray) F0701 in fields with high requirements for decoration environmental protection and anti-corrosion coating
Water-based epoxy resin floor paint is made of water-based epoxy resin and water-based epoxy curing agent, additives formulated in a certain proportion, water as a diluent, more environmentally friendly.
Product indicators:
Test Items | Indicator value | Test value |
Condition in container | Uniformity and no hard lumps after mixing and blending | Homogeneous and no hard lumps after mixing and blending |
Appearance of coating film | Normal | Normal |
Drying time
| Surface drying, h | ≤8 |
Solid dry, h | ≤48 | |
Hardness (pencil) | ≥H | 5H |
Abrasion resistance (750g/500r),g | ≤0.060 | 0.023 |
Adhesion (scribing) | ≤1 | 1(1mm pitch) |
Anti-slip (dry friction coefficient) | ≥0.50 | 0.55 |
Impact resistance | 1000g steel ball, height 100cm, no cracks, no flaking of the coating film. | No cracks in coating film, no flaking |
Water resistance (168h) | No blistering, no flaking, slight discoloration is allowed. | No blistering, no flaking |
- Parameters
Product indicators:
Test Items | Indicator value | Test value |
Condition in container | Uniformity and no hard lumps after mixing and blending | Homogeneous and no hard lumps after mixing and blending |
Appearance of coating film | Normal | Normal |
Drying time
| Surface drying, h | ≤8 |
Solid dry, h | ≤48 | |
Hardness (pencil) | ≥H | 5H |
Abrasion resistance (750g/500r),g | ≤0.060 | 0.023 |
Adhesion (scribing) | ≤1 | 1(1mm pitch) |
Anti-slip (dry friction coefficient) | ≥0.50 | 0.55 |
Impact resistance | 1000g steel ball, height 100cm, no cracks, no flaking of the coating film. | No cracks in coating film, no flaking |
Water resistance (168h) | No blistering, no flaking, slight discoloration is allowed. | No blistering, no flaking |
floor paint (classic gray)
Code:F0701
Product introduction:
Water-based epoxy resin floor paint is made of water-based epoxy resin and water-based epoxy curing agent, additives formulated in a certain proportion, water as a diluent, more environmentally friendly.
product features:
In order to improve the surface brightness of the floor, can be coated with a layer of water-based epoxy resin floor paint on the topcoat, gloss to 90%, hardness up to 5H, paint film plump and bright, waterproof and corrosion-resistant, wear-resistant and scratch-resistant.
Product indicators:
Test Items | Indicator value | Test value |
Condition in container | Uniformity and no hard lumps after mixing and blending | Homogeneous and no hard lumps after mixing and blending |
Appearance of coating film | Normal | Normal |
Drying time
| Surface drying, h | ≤8 |
Solid dry, h | ≤48 | |
Hardness (pencil) | ≥H | 5H |
Abrasion resistance (750g/500r),g | ≤0.060 | 0.023 |
Adhesion (scribing) | ≤1 | 1(1mm pitch) |
Anti-slip (dry friction coefficient) | ≥0.50 | 0.55 |
Impact resistance | 1000g steel ball, height 100cm, no cracks, no flaking of the coating film. | No cracks in coating film, no flaking |
Water resistance (168h) | No blistering, no flaking, slight discoloration is allowed. | No blistering, no flaking |
product use:
It can be used in parking lots, squares, food factories, power plants, electronic factories, exhibition halls, schools, etc., in fields with high requirements for decoration, environmental protection and anti-corrosion coating.
Method of use:
1, water-based epoxy resin floor paint AB components according to the ratio of mixing and stirring evenly, mixing must be used within 60 minutes to prevent gel scrapping;
2, before construction, must deal with the base surface of the flat, clean, dry, the coating in the appropriate temperature, 48h can be dry, fully cured 7 days time, hardness and gloss will be higher and higher.
Precautions:
1. paint mixing should be strictly enforced paint-solid ratio, and pay attention to the mixing of uniformity.
2, should be used according to the amount of each construction paint, has been allocated to the curing agent of the paint should be used up in a timely manner to prevent thickening of the waste.
3, paint and painting process, is strictly prohibited and acid, alkali, alcohol, amine, etc. contact, to avoid adverse consequences.
Transportation and storage.
1. The paint uses water as diluent, which is more environmentally friendly during transportation, use and storage;
2. The effective storage period is 12 months from the date of production.
Storage
In cool and dry place
Previous : Waterborne epoxy resin E0430 Coatings adhesives anticorrosion electrical insulation laminates castings
Next : Two-component water-based epoxy resin floor paint (classic green) F0702 glass fiber carbon fiber infiltration agent Water-based floor coating base material Water based anticorrosive coating base material
Copy product links
Long by picture save/share
Two-component water-based epoxy resin floor paint (classic gray) F0701 in fields with high requirements for decoration environmental protection and anti-corrosion coating
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
