图片展示

Water-based electrostatic flocking adhesive can be used for disposable swabs, cotton swabs, and chemical-resistant wipes

Flocking glue is a water-based product, with strong adhesion, lint rate, chemical resistance, environmental protection and low odor, and is mostly suitable for ABS, PET, PP and other substrates. It has good initial tack and final tack strength, and can achieve temperature resistance above 90 ℃ in combination with curing agent.

    Product introduction:

    Flocking glue is a water-based product, with strong adhesion, lint rate, chemical resistance, environmental protection and low odor, and is mostly suitable for ABS, PET, PP and other substrates. It has good initial tack and final tack strength, and can achieve temperature resistance above 90 ℃ in combination with curing agent.


    Product indicators

    ExteriorMilky white bluish liquid

    PH

    7.0-8.0

    solid content

    40±1%

    IonicityAnions
    Softening Point

    5-10

    Viscosity (25℃)

    2000-3000CPS

    Specific gravity (g/cm3)

    1.05±0.2


    product features:

    • Good adhesion between glue and substrate and glue and fleece

    • Low hair loss rate

    • Good thixotropy of glue

    • Dispensing without tilting the head

    • High flocking fastness

    • Good compatibility with drug-resistant wipes/and preservation liquids

    • Environmentally friendly and low odor

    •Has good initial and final tack strength and curing agent can achieve temperature resistance above 90 ℃


    Applications:

    • Disposable medical nasopharyngeal swab

    • Non-disposable medical nasopharyngeal swabs

    • Sampling swab


    Precautions:

    • When applying glue, ensure ventilation and keep away from children

    • Avoid prolonged contact of uncured glue with skin

    • If splashed into eyes, wipe off with absorbent cotton and warm water and seek medical attention

    •It can be glued by roller coating, spray coating and screen printing

    • The opening time is less than 4 minutes, if the time is exceeded, the flocking fastness may decrease

    • Do not mix with other adhesives of different properties


  • Parameters

    Product introduction:

    Flocking glue is a water-based product, with strong adhesion, lint rate, chemical resistance, environmental protection and low odor, and is mostly suitable for ABS, PET, PP and other substrates. It has good initial tack and final tack strength, and can achieve temperature resistance above 90 ℃ in combination with curing agent.


    Product indicators

    ExteriorMilky white bluish liquid

    PH

    7.0-8.0

    solid content

    40±1%

    IonicityAnions
    Softening Point

    5-10

    Viscosity (25℃)

    2000-3000CPS

    Specific gravity (g/cm3)

    1.05±0.2


    product features:

    • Good adhesion between glue and substrate and glue and fleece

    • Low hair loss rate

    • Good thixotropy of glue

    • Dispensing without tilting the head

    • High flocking fastness

    • Good compatibility with drug-resistant wipes/and preservation liquids

    • Environmentally friendly and low odor

    •Has good initial and final tack strength and curing agent can achieve temperature resistance above 90 ℃


    Applications:

    • Disposable medical nasopharyngeal swab

    • Non-disposable medical nasopharyngeal swabs

    • Sampling swab


    Precautions:

    • When applying glue, ensure ventilation and keep away from children

    • Avoid prolonged contact of uncured glue with skin

    • If splashed into eyes, wipe off with absorbent cotton and warm water and seek medical attention

    •It can be glued by roller coating, spray coating and screen printing

    • The opening time is less than 4 minutes, if the time is exceeded, the flocking fastness may decrease

    • Do not mix with other adhesives of different properties


Water-based electrostatic flocking adhesive can be used for disposable swabs, cotton swabs, and chemical-resistant wipes
Flocking glue is a water-based product, with strong adhesion, lint rate, chemical resistance, environmental protection and low odor, and is mostly suitable for ABS, PET, PP and other substrates. It has good initial tack and final tack strength, and can achieve temperature resistance above 90 ℃ in combination with curing agent.
Long press to look detail
Long by picture save/share

Water-based electrostatic flocking adhesive can be used for disposable swabs, cotton swabs, and chemical-resistant wipes

INQUIRY

在线询盘 MORE+
  • 联系人 *

  • 手机 *

  • 描述

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully

At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .

GET IN TOUCH

Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China. 

Tell : (+86) 755-88834518

(Monday to Friday: 9:00-18:00)

SITEMAP

分类标题

BUSINESS HOURS

Monday to Friday : 9 am to 6 pm

Saturday : 10 am to 4 pm

Sunday : Closed Support Hours in 24/7 Everyday

NEWS LETTER

  • E-mail *

Submit

Security Code
Refresh the code
Cancel
Confirm

Enter your email address for our mailing list to keep your self our lastest updated.

© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved     Site Map

Hello! welcome to consult~
Contacts
Tel
+86 15986601598
Tel
+86 15817282250
Tel
(+86) 755-88834518
work
Monday to Friday: 9:00-18:00
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了